PORTABLE GAS MONITORS
-
Details
Compact and robust 1-to-4 sensor design
Full 3-year warranty on all sensors
CSA and Ex certified
INMETRO certified
MSHA Approved version available
Interchangeable battery packs for up to 24 hours continuous operation
Motorized pump operable in diffusion or sample-draw mode
Highly water resistant (IP 67)
Affordable price! -
Details
Intuitive operation
Radio module (optional)
Wireless interface to control center
Real time motion, position and man-down readings
Triple warning signal
Strong battery
Integrated pump -
Details
Exceptional HAZMAT and Confined Space performance
Up to 6 channels of detection, including…
PID sensor for direct reading of toxic VOCs
Infrared (IR) sensors for CO2 and combustible gas (0 % LEL – 100% volume)
Full 3-year warranty on Combustible, CO, H2S and CO2 sensors and a 5-year warranty on the O2 sensor
Wide range of additional sensors
Highly configurable smart sensor design
CSA and Ex certified
INMETRO certified
Full featured, rugged design
Optional motorized pump operable in diffusion or sample draw mode
Affordable price!
DOCKING STATIONS & ACCESSORIES
-
Details
Fully automatic functional bump test and calibration
Automatic test of alarms, charging and record keeping
Simple pass / fail indication
Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
No computer necessary
Up to 2,000,000 records in memory
Cascade multiple docking stations
Saves times, gas and efforts for lower cost of ownership
Print official calibration certificates -
Details
Four test gas ports
Fully automatic functional bump test and calibration
Automatic test of alarms, charging and record keeping
Simple pass / fail indication
Cascade multiple docking stations
Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
No computer necessary
Up to 2,000,000 records in memory
Saves times, gas and efforts for lower cost of ownership
Print official calibration certificates -
Details
Optimized alarm system
Visual alarm via the G450/G460 display and alarm LEDs
Audible and Vibration alarm via the G450/G460
Allows monitor to be used in either pump or diffusion mode
Independent power supply
300 feet remote sampling capability
CSA certified
INMETRO certified
MSHA Approved version available
RESPIRATORY AIR MONITORS
-
Details
Simple to connect, two wire transmitter
10-30 VDC operation
Industry standard 4-20 mA output
Easy adjustment of calibration and zero at the transmitter
Cost effective CO monitoring of supplied breathing air systems
Robust design and long life electrochemical sensor operation -
Details
Continuous Carbon monoxide (CO) monitor for compressed air
Robust, easy to operate design
Integrated dew point measurement (if specified)
Meets OSHA monitoring requirements for grade D breathing air
AutoCal® automatic calibration
Available in CE or CSA marked models
Dryer control relays (DPX model only)
User-adjustable alarm points
Dry contacts for remote horn and lights
Internal, case-mounted horn
LCD display
NEMA 4X housing
Three-stage filtering option for up to 8 users -
Details
25 CFM CO and O2 monitor
Low pressure alarm
Rugged design
Loud audible and bright visual alarms
Adjustable alarm settings
24 hour run-time (no alarms)
3 stage filtration with Autodrain
DC operation with rechargeable battery
2-hour charge time
Dependable long life electrochemical sensors
FIXED SYSTEMS
-
Details
Complete control package available in single channel or 1-4 channel configurations
Compact design
Intuitive push button operation
4-20 mA input standard (factory configurable to 0.2-1 mA)
3 user-adjustable alarm hysteresis
Polycarbonate Industrial Enclosure
Easy installation
4 relays (3 alarm and 1 fault)
Factory configured alarm functions include:Latching/non-latching
Resettable/non-resettable
Time delay
Rapid rise alarm for combustible setups
Local display, horn and strobe
4-20 mA output (2210-001X)
2 Amp power supply -
Details
Single channel controller or one to four channel controller
Intuitive push-button operation
Easy installation on standard DIN rail
4 – 20 mA input standard (factory configured to 0.2 – 1 mA)
3 user-adjustable alarm points
User-adjustable alarm hysteresis
4 relays (3 alarm and 1 fault)
Din rail power supplies available
Factory configured alarm functions include:Latching/non-latching
Resettable/non-resettable
Time delay
Rapid rise alarm for combustible setups
4 – 20 mA output (GMA 41B only) -
Details
Remote Control for 28 series transmitters
Provides a display and a keypad
Approved for use in explosive areas
Controls/adjusts zero point and sensitivity
ATEX certified -
Details
Centralized visualization via touch-screen computer interface
Displays current measuring values and events
8″ or 15″ TFT-LCD, waterproff IP 65 flat panel design
Solid aluminum die-casting front bezel and chassis
Dual core low power fanless system -
Details
AutoCal® automatic calibration
Smart sensor technology
Digital display / control connection
Internal push-button alarm settings -
Details
Easy installation
Local display and horn / strobe
Adjustable alarm points
On-board relays for external controls
4-20 mA output
CC 33 Fixed Transmitter
ZD 22 Fixed Transmitter
EC 22 Fixed Transmitter
